Hatco Water Heater Booster [TW]

Hatco Compact / Imperial Water Heater Booster

Benefits

* High-Temperature Sanitizing: Boosts standard hot water (typically 120°F or 140°F) up to a 180°F (82°C) final sanitizing rinse to satisfy commercial dishwashing codes and flash-dry tableware.
* Castone Lined Tank: Heavy-duty internal tank is lined with a non-corrosive cementitious material (Castone) for maximum thermal insulation and corrosion resistance.
* Complete Integrated Controls: Factory pre-plumbed and pre-wired with an adjustable immersion thermostat, high-temperature limit safety switch, and low-water cut-off to protect elements from burnout.
* Built-In Heat Trap & Insulation: Wrapped in dense fiberglass insulation with built-in heat traps to minimize heat loss during idle periods.
* Compact Placement Versatility: Features a front-accessible panel with a powder-coated body and stainless steel front plate, designed to fit cleanly under dishtables or on floor mounting legs.

New & Used Cost

* New Cost: Typically ranges between $2,500 and $4,200 depending on the kilowatt rating (e.g., 6 kW to 18 kW Compact C-Series) and phase/voltage configuration.
* Used / Refurbished Cost: Typically ranges between $500 and $1,200 depending on element condition, tank integrity, scale/liming build-up, and seller warranty.

Full Technical Specifications

Dimensions & Weight (Compact C-Series)

* Overall Width: 13.06 inches (33.2 cm)
* Overall Depth: 26.00 inches (66.0 cm)
* Overall Height: 19.78 inches (50.2 cm) (excluding legs; height with 6" legs is approx. 25.78 inches)
* Storage Capacity: 6 Gallons (23 Liters)
* Net Weight: Approx. 118 lbs to 130 lbs (53.5 kg to 59 kg)
* Shipping Weight: Approx. 130 lbs to 145 lbs (59 kg to 66 kg)

Electrical & Heating Specifications

* Voltage Options: 208V / 240V / 480V (1-Phase or 3-Phase available)
* Power Rating / Wattage: 4.0 kW to 57.0 kW (varies by sub-model C-4 through C-57)
* Amperage Draw: Varies by kW and voltage (e.g., 6 kW at 208V/1PH draws approx. 28.9 Amps)
* Water Temperature Rise Capacity: 40°F rise (up to 60 GPH) / 70°F rise (up to 34 GPH)

Operational & Structural Details

* Housing Material: Stainless steel front panel with silver-gray powder-coated hammertone body
* Plumbing Connections: 3/4" NPT female inlet and outlet connections
* Safety Devices: Temperature/pressure relief valve, pressure reducing valve with bypass, and low-water cut-off
* Certifications: NSF Standard listed and cULus certified for commercial food service